Scorpio CRDe Diagnostic Code

P1214Chip-specific errors ->CY33X internal parity error 93

P1215 Chip-specific errors ->CY33X internal program flow error


P1216-Chip-specific errors ->CY33X check of inv. YSEL during ON
failed

P1217 Chip-specific errors ->CY33X ON timeout for at least 1
cylinder

P1220-Plausibility with APP1 violated 16

P1221 Accelerator Pedal signal not plausible with brake 16

P1250-No Load


P1251-Excess Temperature 102

P1252-Short Circuit to Battery


P1253-Short Circuit to Ground


P1340-Offset between camshaft and crankshaft


P1530-Short Circuit to battery


P1531-Short Circuit to ground


P1532-No load


P1533-Excess Temperature


P1600-ADC monitoring : SRC-High error of ADC reference voltage


P1601-ADC monitoring : SRC-Low error of ADC reference voltage


P1602-ADC monitoring : Test impulse error


P1603-ADC monitoring : ADC queue error


P1608-Short circuit to battery


P1609-Short circuit to ground

P1621-below lower limit of energizing time -Injector 2


P1623-below lower limit of energizing time-Injector 3


P1625=below lower limit of energizing time-Injector 4


P1631-(Hardware) CJ940 upper limit: internal supply voltage upper
limit


P1632-(Hardware) CJ940 lower limit: internal supply voltage lowerlimit


P1638-Set, if error-counter of Watchdog or controller are not
plausible or the system must shut down

P1641-Test of redundant shut off paths during initialization: Watch
dog switch off path defect

P1642-Test of redundant shut off paths during initialization:
Voltage monitoring upper limit shut off path defect

P1643-Test of redundant shut off paths during initialization:
Voltage monitoring lower limit shut off path defect

P1644-Voltage above upper limit


P1645-Voltage below lower limit

P1646-Voltage above upper limit

P1647-Voltage below lower limit


P1654-Short Circuit to Battery

P1655-Short Circuit to Battery

P1656-No Load


P1657-Excess Temperature


P1658-No Terminal T15 signals detected


P1659-Deviation between TPU and system time


P1660-No Load


P1661-Excess Temperature


P1664-The fault path contains the supervision of the SPI-Handler
Set, if SPI-communication failed

P1791-Brake signals not plausible


P1792-Brake signal is defective


P1887-Short Circuit to Battery


P1888-Short Circuit to Ground

P1889-No Load

P1890-Excess temperature

Leave a Reply

Your email address will not be published. Required fields are marked *

0